Store

 


Featured

 

 

Each bottle contains 50ml and should do around 20 to 40 1/48 scale models. It is available in eight colours Dark dirt, light dirt, Rust, black, Sand, Concrete, Grime and Mud brown.To watch a short video on the wash click Here. All the colours can be mixed together to make any colour or shade of wash you like.

 

Each bottle contains 50ml and should do around 20 to 40 1/48 scale models. It is available in seven colours Dark dirt, light dirt, Rust, black, Sand, Concrete and mud brown.To watch a short video on the wash click Here. All the colours can be mixed together to make any colour or shade of wash you like.

 

Flory Models set of washes only £37.50 

All washes, Black, Dark, Light, Mud, Rust, Sand, Concrete Gray, Grime

 

 

 

Promodellers/Flory Models Black weathering wash. £5.50

The black wash is great for very dirty weathering like engines, wheels, wheel wells, tanks and trains. The wash can also be mixed with any of the other colours to darken them to any shade you like.  

 

 

 

 

Promodellers/Flory Models Light weathering wash. £5.50  ( this replaced the old Winter camo wash)

 The light wash is great for very dusty weathering like cockpits, vehicles, figures, tanks and trains. The wash can also be mixed with any of the other colours to lighten them to any shade you like.

 

 

 

 

Promodellers/Flory Models Dark weathering wash. £5.50

The dark wash is great for almost all weathering for full washes of the model aircraft, ships,figures, tanks and trains. The wash is the base colour but can be mixed with any of the other colours to make any shade you like.

 

 

 

 

Promodellers/Flory Models Mud brown weathering wash. £5.50 

The mud wash is great in any areas that require that muddy look, from the bottom of aircraft, ships,figures, tanks and trains. The wash can be mixed with any of the other colours to make any shade you like.

 

 

 

 

Promodellers/Flory Models RUST wash. £5.50 

The Rust wash is great any areas that require that rusty look, from the bottom of aircraft, ships, tanks and trains. The wash can be mixed with any of the other colours to make any shade you like.

 

 

 

 

Promodellers/Flory Models SAND weathering wash. £5.50

The Sand wash is great for dusty weathering like wheels, wheel wells, tanks and trains. The wash can also be mixed with any of the other colours to darken them to any shade you like.

 

 

 

 

Promodellers/Flory Models Concrete (Gray) wash. £5.50

The Gray wash is great for dirty weathering like dusty dirty look on, wheels, wheel wells, tanks, trains and buildings. The wash can also be mixed with any of the other colours to make any shade you like.

 

 

 

Promodellers/Flory Models Grime wash. £5.50

The Grime wash is great for dirty weathering like dusty dirty grime look on, wheels, wheel wells, tanks, trains and buildings. The wash can also be mixed with any of the other colours to make any shade you like.

 

 

 

 

Weathering wash

As easy as 1,2,3 

 

The weathering wash is the easiest way to create the best looking panel lines and weathering in no time with three easy steps, 1. brush or airbrush it on the model. 2. Let it dry (20mins) 3. Wipe it off with some damp kitchen roll. That’s it , that simple. It also does so much more. It can be used anywhere on a model from cockpits to wheel wells, engines to weapons. It works just as well on tanks, ships and vehicles. The best bit is, if you don’t like it, just wash it off and start again. That simple.

The wash comes in eight colours, Dark dirt, Light Dirt, Black, Mud Brown, Rust, Sand, Concrete and Grime . All the colours can be mixed into any shade or colour you need.

 

 

 

 

 

 

panel%20line%20wash.JPG

   

1. Brush on the wash

It is recommended that you use the wash over a gloss clear coat when using the wash for the first time. When you have used the wash and are happy with the results you can use it on satin and even flat coats to give a more weathered look to your models. Make sure the surface you will be using it on is completely dry before applying the wash as if it is not, the wash might work into the paint itself and you will not be able to remove it.   

 

 

 

 

wash%20dry.JPG 

 

2, Let it dry

Once the wash is on the model allow to dry. Depending on the temperature this will take around 20 minutes. You could speed things up by using a hair dryer on a cool setting. The wash can be left on as long as you like as this will not effect the paint work. In tests the wash has been left on for 3 months and it still came off the model with no problem.   

 

 

 

 

 

wash%20off.JPG3. Wipe it off.

 

When the wash is totally dry you can remove the wash with a damp cloth or better still some good quality kitchen roll. I lick to moisten, then starting with circular movements wipe the wash off. If you use circular movement you will work the wash into any panel lines that do not have any wash in them. Depending on how much you moisten the cloth, it will determine how much of the wash will be removed. If you just want the panel line to have the wash, then a moist cloth is fine but if you were after a little more weathered look then using the cloth dry and lightly rubbing will leave more of the wash behind to give a more dirty looking model. When you are happy that you have got all the wash you want off make a final wipe around in the direction of the air flow. Remember any wash left on after a clear coat is added will show up alot more as the wash will darken up.

 

 

A Before and after.

 

wash%20before.JPG

wash%20after.JPG

 

 

Here are two videos showing the was in action. First is a 20 minutes video to show you just how simple the wash is the use on aircraft.

 

 

 

 

 

Second it the wash on a desert coloured Tank.